/*    
  * Copyright (c) 2022, SHANGHAI FUDAN MICROELECTRONICS GROUP CO., LTD.(FUDAN MICROELECTRONICS./ FUDAN MICRO.)    
  * All rights reserved.    
  *    
  * Processor:                   FM33LG0xxA    
  * http:                        http://www.fmdevelopers.com.cn/    
  *    
  * Redistribution and use in source and binary forms, with or without    
  * modification, are permitted provided that the following conditions are met    
  *    
  * 1. Redistributions of source code must retain the above copyright notice,    
  *    this list of conditions and the following disclaimer.    
  *    
  * 2. Redistributions in binary form must reproduce the above copyright notice,    
  *    this list of conditions and the following disclaimer in the documentation    
  *    and/or other materials provided with the distribution.    
  *    
  * 3. Neither the name of the copyright holder nor the names of its contributors    
  *    may be used to endorse or promote products derived from this software    
  *    without specific prior written permission.    
  *    
  * 4. To provide the most up-to-date information, the revision of our documents     
  *    on the World Wide Web will be the most Current. Your printed copy may be      
  *    an earlier revision. To verify you have the latest information avaliable,    
  *    refer to: http://www.fmdevelopers.com.cn/.    
  *    
  * THIS SOFTWARE IS PROVIDED BY FUDAN MICRO "AS IS" AND ANY EXPRESSED     
  * ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES     
  * OF MERCHANTABILITY NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE    
  * ARE DISCLAIMED.IN NO EVENT SHALL FUDAN MICRO OR ITS CONTRIBUTORS BE LIABLE     
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL     
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS     
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER    
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,     
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISINGIN ANY WAY OUT OF THE     
  * USE OF THIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.    
 */    
#include "bstim32.h"
#include "main.h"
#include "appTask.h"

/**
  * @brief  BSTIM中断服务函数
  * @param  void
  * @retval void
  */

//BSTIM_IRQHandler合并至LIN.C

/**
  * @brief  BSTIM32初始化
  * @param  void
  * @retval void
  */
void BSTIM32_Init(void)
{
    FL_BSTIM32_InitTypeDef    TimerBase_InitStruct;

    TimerBase_InitStruct.prescaler  = 8 - 1;
    TimerBase_InitStruct.autoReload = 4000 - 1;
    TimerBase_InitStruct.autoReloadState = FL_ENABLE;
    TimerBase_InitStruct.clockSource = FL_CMU_BSTIM32_CLK_SOURCE_APBCLK;

    FL_BSTIM32_Init(BSTIM32, &TimerBase_InitStruct);

  
    FL_BSTIM32_ClearFlag_Update(BSTIM32);    /* 清除计数器中断标志位 */
    FL_BSTIM32_EnableIT_Update(BSTIM32);     /* 开启计数器中断 */
  
  
    NVIC_DisableIRQ(BSTIM_IRQn);
    NVIC_SetPriority(BSTIM_IRQn, 2);        /* 中断优先级配置 */
    NVIC_EnableIRQ(BSTIM_IRQn);


    FL_BSTIM32_Enable(BSTIM32);         /* 使能定时器 */

}

/**
  * @brief  BSTIM32模块复位
  * @param  void
  * @retval void
  */
void BSTIM32_DeInit(void)
{
    /* 恢复外设寄存器到复位值 */
    FL_BSTIM32_DeInit(BSTIM32);

    /* 清除中断挂起 */
    NVIC_ClearPendingIRQ(BSTIM_IRQn);

    /* 关闭NVIC中断 */
    NVIC_DisableIRQ(BSTIM_IRQn);
}