/* ** ################################################################### ** Processor: M0144A ** Compiler: IAR ANSI C/C++ Compiler for ARM ** ** Abstract: ** Linker file for the IAR ANSI C/C++ Compiler for ARM ** ** Copyright (c) 2022, Shenzhen CVA Innovation CO.,LTD ** All rights reserved. ** ** Shenzhen CVA Innovation CO.,LTD (CVA chip) is supplying this file for use ** exclusively with CVA's microcontroller products. This file can be freely ** distributed within development tools that are supporting such microcontroller ** products. ** ** THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED ** OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF ** MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. ** CVA SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, ** OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. ** ** http: www.cvachip.com ** ** ################################################################### */ /* If symbol __flash_vector_table__=1 is defined at link time * the interrupt vector will not be copied to RAM. * Warning: Using the interrupt vector from FLASH will not allow * INT_SYS_InstallHandler because the section is Read Only. */ /* If want to debug the asw code without bootloader, please enable the define */ //define symbol __asw_debug_en__ = 0x00000001; //define symbol __flash_vector_table__ = 0x00000001; define symbol __ram_vector_table_size__ = isdefinedsymbol(__flash_vector_table__) ? 0 : 0x00000400; define symbol __ram_vector_table_offset__ = isdefinedsymbol(__flash_vector_table__) ? 0 : 0x000003FF; /* Flash */ define symbol m_interrupts_start = isdefinedsymbol(__asw_debug_en__) ? 0 : 0x00010000; define symbol m_interrupts_end = isdefinedsymbol(__asw_debug_en__) ? 0 : 0x000103FF; define symbol m_asw_header_start = 0x00010400; define symbol m_asw_header_end = 0x0001041f; define symbol m_asw_code_start = 0x00010420; define symbol m_asw_code_end = 0x0007FFFB; define symbol m_asw_crc_start = 0x0007FFFC; define symbol m_asw_crc_end = 0x0007FFFF; /* SRAM_L */ define symbol m_interrupts_ram_start = 0x1FFF0000; define symbol m_interrupts_ram_end = 0x1FFF0000 + __ram_vector_table_offset__; define symbol m_data_start = m_interrupts_ram_start + __ram_vector_table_size__; define symbol m_data_end = 0x1FFFEFFF; /* SRAM_U */ define symbol m_data_2_start = 0x20000000; define symbol m_data_2_end = 0x2000EFEF; define symbol m_data_2_noinit_start = 0x2000EFF0; define symbol m_data_2_noinit_end = 0x2000EFFF; /* Sizes */ if (isdefinedsymbol(__stack_size__)) { define symbol __size_cstack__ = __stack_size__; } else { define symbol __size_cstack__ = 0x00001000; } if (isdefinedsymbol(__heap_size__)) { define symbol __size_heap__ = __heap_size__; } else { define symbol __size_heap__ = 0x00000400; } define exported symbol __VECTOR_TABLE = m_interrupts_start; define exported symbol __VECTOR_RAM = isdefinedsymbol(__flash_vector_table__) ? m_interrupts_start : m_interrupts_ram_start; define exported symbol __RAM_VECTOR_TABLE_SIZE = __ram_vector_table_size__; define exported symbol __RAM_START = m_interrupts_ram_start; define exported symbol __RAM_END = m_data_2_noinit_end; define memory mem with size = 4G; define region m_asw_header_region = mem:[from m_asw_header_start to m_asw_header_end]; define region m_asw_code_region = mem:[from m_interrupts_start to m_interrupts_end] | mem:[from m_asw_code_start to m_asw_code_end]; define region m_asw_crc_region = mem:[from m_asw_crc_start to m_asw_crc_end]; define region DATA_region = mem:[from m_data_start to m_data_end]; define region DATA_noinit_region = mem:[from m_data_2_noinit_start to m_data_2_noinit_end]; define region DATA_region_2 = mem:[from m_data_2_start to m_data_2_end-__size_cstack__]; define region CSTACK_region = mem:[from m_data_2_end-__size_cstack__+1 to m_data_2_end]; define region m_interrupts_ram_region = mem:[from m_interrupts_ram_start to m_interrupts_ram_end]; define block CSTACK with alignment = 8, size = __size_cstack__ { }; define block HEAP with alignment = 8, size = __size_heap__ { }; define block RW { readwrite }; define block ZI { zi }; /* Custom Section Block that can be used to place data at absolute address. */ /* Use __attribute__((section (".customSection"))) to place data here. */ define block customSectionBlock { section .customSection }; define block __CODE_ROM { section .textrw_init }; define block __CODE_RAM { section .textrw }; initialize manually { section .textrw }; initialize manually { section .bss, section .bss.no_init}; initialize manually { section .customSection, section .code_ram}; initialize manually { section .data, section .code_ram }; initialize manually { section __DLIB_PERTHREAD }; do not initialize { section .no_init, section .bss, section .data, section __DLIB_PERTHREAD, section .customSection}; place at address mem: m_interrupts_start { readonly section .intvec }; place in m_asw_code_region { readonly }; place in m_asw_code_region { block __CODE_ROM }; place in DATA_region { block RW }; place in DATA_region { block __CODE_RAM }; place in DATA_region_2 { first block customSectionBlock }; place in DATA_region_2 { block ZI }; place in DATA_region_2 { last block HEAP }; place in CSTACK_region { block CSTACK }; place in m_interrupts_ram_region { section m_interrupts_ram }; place in DATA_noinit_region { readwrite section .bss.no_init }; place in m_asw_header_region { readonly section .asw_header}; place in m_asw_crc_region { readonly section .checksum};