LYFJDB/ECU_APP/r_cg_intc.c

/***********************************************************************************************************************
* DISCLAIMER
* This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
* No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
* applicable laws, including copyright laws. 
* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
* LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
* ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability 
* of this software. By using this software, you agree to the additional terms and conditions found by accessing the 
* following link:
* http://www.renesas.com/disclaimer
*
* Copyright (C) 2012, 2021 Renesas Electronics Corporation. All rights reserved.
***********************************************************************************************************************/

/***********************************************************************************************************************
* File Name    : r_cg_intc.c
* Version      : CodeGenerator for RL78/F13 V2.03.07.02 [08 Nov 2021]
* Device(s)    : R5F10BGG
* Tool-Chain   : CCRL
* Description  : This file implements device driver for INTC module.
* Creation Date: 2022/7/8
***********************************************************************************************************************/

/***********************************************************************************************************************
Includes
***********************************************************************************************************************/
#include "r_cg_macrodriver.h"
#include "r_cg_intc.h"
/* Start user code for include. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */
#include "r_cg_userdefine.h"

/***********************************************************************************************************************
Pragma directive
***********************************************************************************************************************/
/* Start user code for pragma. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */

/***********************************************************************************************************************
Global variables and functions
***********************************************************************************************************************/
/* Start user code for global. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */

/***********************************************************************************************************************
* Function Name: R_INTC_Create
* Description  : This function initializes INTP module.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC_Create(void)
{
    PMK0 = 1U;    /* disable INTP0 operation */
    PIF0 = 0U;    /* clear INTP0 interrupt flag */
    PMK1 = 1U;    /* disable INTP1 operation */
    PIF1 = 0U;    /* clear INTP1 interrupt flag */
    PMK2 = 1U;    /* disable INTP2 operation */
    PIF2 = 0U;    /* clear INTP2 interrupt flag */
    PMK3 = 1U;    /* disable INTP3 operation */
    PIF3 = 0U;    /* clear INTP3 interrupt flag */
    PMK4 = 1U;    /* disable INTP4 operation */
    PIF4 = 0U;    /* clear INTP4 interrupt flag */
    PMK5 = 1U;    /* disable INTP5 operation */
    PIF5 = 0U;    /* clear INTP5 interrupt flag */
    PMK6 = 1U;    /* disable INTP6 operation */
    PIF6 = 0U;    /* clear INTP6 interrupt flag */
    PMK7 = 1U;    /* disable INTP7 operation */
    PIF7 = 0U;    /* clear INTP7 interrupt flag */
    PMK8 = 1U;    /* disable INTP8 operation */
    PIF8 = 0U;    /* clear INTP8 interrupt flag */
    PMK9 = 1U;    /* disable INTP9 operation */
    PIF9 = 0U;    /* clear INTP9 interrupt flag */
    /* Set INTP0 low priority */
    PPR10 = 1U;
    PPR00 = 1U;
    /* Set INTP1 low priority */
    PPR11 = 1U;
    PPR01 = 1U;
    /* Set INTP2 low priority */
    PPR12 = 1U;
    PPR02 = 1U;
    /* Set INTP4 low priority */
    PPR14 = 1U;
    PPR04 = 1U;
    /* Set INTP6 low priority */
    PPR16 = 1U;
    PPR06 = 1U;
    /* Set INTP7 low priority */
    PPR17 = 1U;
    PPR07 = 1U;
    /* Set INTP8 low priority */
    PPR18 = 1U;
    PPR08 = 1U;
    EGP0 = _01_INTP0_EDGE_RISING_SEL | _02_INTP1_EDGE_RISING_SEL | _04_INTP2_EDGE_RISING_SEL |
           _10_INTP4_EDGE_RISING_SEL | _40_INTP6_EDGE_RISING_SEL | _80_INTP7_EDGE_RISING_SEL;
    EGN1 = _01_INTP8_EDGE_FALLING_SEL;
    INTFLG0 &= _C2_INTFLG0_MASK_VALUE;
    INTMSK = _00_INTP4_CONTROL_ENABLE | _02_INTP5_CONTROL_DISABLE | _00_INTP6_CONTROL_ENABLE |
             _F8_INTP_INTMSK_INIT_VALUE;
    /* Set INTP1 pin */
    PIM12 &= 0xDFU;
    PMC12 &= 0xDFU;
    PM12 |= 0x20U;
    /* Set INTP2 pin */
    PM3 |= 0x02U;
    /* Set INTP4 pin */
    PMC12 &= 0xFEU;
    PM12 |= 0x01U;
    /* Set INTP6 pin */
    PIM7 &= 0xFDU;
    PM7 |= 0x02U;
    /* Set INTP7 pin */
    PM3 |= 0x04U;
    /* Set INTP8 pin */
    PIM7 &= 0xFEU;
    PM7 |= 0x01U;
}

/***********************************************************************************************************************
* Function Name: R_INTC0_Start
* Description  : This function clears INTP0 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC0_Start(void)
{
    PIF0 = 0U;    /* clear INTP0 interrupt flag */
    PMK0 = 0U;    /* enable INTP0 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC0_Stop
* Description  : This function disables INTP0 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC0_Stop(void)
{
    PMK0 = 1U;    /* disable INTP0 interrupt */
    PIF0 = 0U;    /* clear INTP0 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC1_Start
* Description  : This function clears INTP1 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC1_Start(void)
{
    PIF1 = 0U;    /* clear INTP1 interrupt flag */
    PMK1 = 0U;    /* enable INTP1 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC1_Stop
* Description  : This function disables INTP1 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC1_Stop(void)
{
    PMK1 = 1U;    /* disable INTP1 interrupt */
    PIF1 = 0U;    /* clear INTP1 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC2_Start
* Description  : This function clears INTP2 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC2_Start(void)
{
    PIF2 = 0U;    /* clear INTP2 interrupt flag */
    PMK2 = 0U;    /* enable INTP2 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC2_Stop
* Description  : This function disables INTP2 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC2_Stop(void)
{
    PMK2 = 1U;    /* disable INTP2 interrupt */
    PIF2 = 0U;    /* clear INTP2 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC4_Start
* Description  : This function clears INTP4 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC4_Start(void)
{
    PIF4 = 0U;    /* clear INTP4 interrupt flag */
    PMK4 = 0U;    /* enable INTP4 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC4_Stop
* Description  : This function disables INTP4 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC4_Stop(void)
{
    PMK4 = 1U;    /* disable INTP4 interrupt */
    PIF4 = 0U;    /* clear INTP4 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC6_Start
* Description  : This function clears INTP6 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC6_Start(void)
{
    PIF6 = 0U;    /* clear INTP6 interrupt flag */
    PMK6 = 0U;    /* enable INTP6 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC6_Stop
* Description  : This function disables INTP6 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC6_Stop(void)
{
    PMK6 = 1U;    /* disable INTP6 interrupt */
    PIF6 = 0U;    /* clear INTP6 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC7_Start
* Description  : This function clears INTP7 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC7_Start(void)
{
    PIF7 = 0U;    /* clear INTP7 interrupt flag */
    PMK7 = 0U;    /* enable INTP7 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC7_Stop
* Description  : This function disables INTP7 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC7_Stop(void)
{
    PMK7 = 1U;    /* disable INTP7 interrupt */
    PIF7 = 0U;    /* clear INTP7 interrupt flag */
}

/***********************************************************************************************************************
* Function Name: R_INTC8_Start
* Description  : This function clears INTP8 interrupt flag and enables interrupt.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC8_Start(void)
{
    PIF8 = 0U;    /* clear INTP8 interrupt flag */
    PMK8 = 0U;    /* enable INTP8 interrupt */
}

/***********************************************************************************************************************
* Function Name: R_INTC8_Stop
* Description  : This function disables INTP8 interrupt and clears interrupt flag.
* Arguments    : None
* Return Value : None
***********************************************************************************************************************/
void R_INTC8_Stop(void)
{
    PMK8 = 1U;    /* disable INTP8 interrupt */
    PIF8 = 0U;    /* clear INTP8 interrupt flag */
}

/* Start user code for adding. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */