/******************************************************************************
*
* Freescale Semiconductor Inc.
* (c) Copyright 2008-2015 Freescale Semiconductor, Inc.
* ALL RIGHTS RESERVED.
*
******************************************************************************/
/**************************************************************************//**
* @addtogroup diagnostic_group
* @{
******************************************************************************/
/**************************************************************************//**
*
* @file      lin_diagnostic_service.c
*
* @author    FPT Software
*
* @brief     Diagnostic Service slave functions
*
******************************************************************************/
/******************************************************************************
 *
 * History:
 *
 * 20090718     v1.0    First version
 * 20111005     v1.1    Updated diagnostics service
 *
 *****************************************************************************/

#include "lin_commontl_proto.h"
#include "lin_diagnostic_service.h"

/* Define functionality */
#ifndef MULTI_PDU_SUPPORT
#define MULTI_PDU_SUPPORT 0                         /**< multi PDU support */
#endif /* End MULTI_PDU_SUPPORT */

/********------------- Code supports SINGLE interface ----------------**********/
#if LIN_MODE == _SLAVE_MODE_
/*************************** FUNCTIONS *******************/
/* Unuse for GPIO */
#if ( _LIN_GPIO_ == 0 ) && !defined(_MC9S08SC4_H) && !defined(MCU_SKEAZN84)
#if LIN_PROTOCOL == PROTOCOL_21

void lin_diagservice_assign_frame_id()
{
    l_u16 supid, msg_id,pid,current_id;
    lin_tl_pdu_data *lin_tl_pdu;
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    l_u16 length;
    l_u8 data[10];
    /* get pdu from rx queue */
    ld_receive_message(&length, data+2);
    lin_tl_pdu = (lin_tl_pdu_data *)data;
#else /* Single frame support */
    lin_tl_pdu = tl_current_rx_pdu_ptr;
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
    supid = (l_u16)(((*lin_tl_pdu)[4]) << 8);
    supid = supid |(l_u16)((*lin_tl_pdu)[3]);
    //product_id.supplier_id = supid;

    msg_id = (l_u16)(((*lin_tl_pdu)[6]) << 8);
    msg_id = msg_id |(l_u16)((*lin_tl_pdu)[5]);
    //product_id.function_id = fid;
    
    pid = (*lin_tl_pdu)[7];
    current_id = lin_process_parity(pid,CHECK_PARITY);
    
    if(supid==0x0B00 || supid==0x7FFF){//iav测试台架发的spid与软件定义spid，高位低位相反，目前直接写死
        if(msg_id==0x5001){
            lin_configuration_RAM[1]= current_id;
            lin_tl_make_slaveres_pdu(SERVICE_ASSIGN_FRAME_ID, POSITIVE, 0);
        }
        else if(msg_id==0x5000){
            lin_configuration_RAM[2]= current_id;
            lin_tl_make_slaveres_pdu(SERVICE_ASSIGN_FRAME_ID, POSITIVE, 0);
        }
    }
}


void lin_diagservice_assign_frame_id_range()
{
    l_u8 start_index;
    l_s8 j, i = 7;
    lin_tl_pdu_data *lin_tl_pdu;
    /* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    l_u16 length;
    l_u8 data[10];
    /* get pdu from rx queue */
    ld_receive_message(&length, data+2);
    lin_tl_pdu = (lin_tl_pdu_data *)data;
#else /* Single frame support */
    lin_tl_pdu = tl_current_rx_pdu_ptr;
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
    /* Get start index in request */
    start_index = (*lin_tl_pdu)[3];
   
//    for (i = 7, j = start_index+4; j > start_index; i--, j-- )
//    {
//        if ((0xFF != (*lin_tl_pdu)[i]) && (j > LIN_CFG_FRAME_NUM))
//        {
//            lin_tl_make_slaveres_pdu(SERVICE_ASSIGN_FRAME_ID_RANGE, NEGATIVE, GENERAL_REJECT);
//            return;
//        }
//    }

//    /* Store PIDs */
//    for (i = 4, j = start_index + 1; i < 8; i++, j++)
//    {
//        switch ((*lin_tl_pdu)[i])
//        {
//            case 0x00:
//                /* Unassign frame */
//                lin_configuration_RAM[j] = 0xFF;
//                break;

//            case 0xFF:
//                /* keep the previous assigned value of this frame */
//                break;

//            default:
//                /* Calculate frame ID & Assign ID to frame */
//                lin_configuration_RAM[j] = lin_process_parity((*lin_tl_pdu)[i], CHECK_PARITY);
//                break;
//        }
//    } /* End of for statement */
    
    lin_tl_make_slaveres_pdu(SERVICE_ASSIGN_FRAME_ID_RANGE, POSITIVE, 0);
}

void lin_diagservice_read_by_identifier()
{
    l_u8 id;
    l_u16 supid, fid;
    lin_tl_pdu_data *lin_tl_pdu;

    /* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    l_u16 length;
    l_u8 data[10];
    /* get pdu from rx queue */
    ld_receive_message(&length, data+2);
    lin_tl_pdu = (lin_tl_pdu_data *)data;
#else /* Single frame support */
    lin_tl_pdu = tl_current_rx_pdu_ptr;
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
    
    //20200801:ȫ���ظ�����Ӧ
    //lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, POSITIVE, 0);
    //return;
    
    /* Get supplier and function indentification in request */
    supid = (l_u16)(((*lin_tl_pdu)[5]) << 8);
    supid = supid |(l_u16)((*lin_tl_pdu)[4]);

    fid = (l_u16)(((*lin_tl_pdu)[7]) << 8);
    fid = fid |(l_u16)((*lin_tl_pdu)[6]);


//    /* Check Supplier ID and Function ID */
//    if (((supid != product_id.supplier_id) && (supid != LD_ANY_SUPPLIER)) || \
//            ((fid != product_id.function_id) && (fid != LD_ANY_FUNCTION)))
//    {
//        tl_slaveresp_cnt = 0;
//    #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
//        tl_service_status = LD_SERVICE_IDLE;
//    #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
//        return;
//    }
    id = (*lin_tl_pdu)[3];

    switch (id)
    {
        case LIN_PRODUCT_IDENT:
            if((supid==0x0B00 || supid==0x7FFF) && (fid==product_id.function_id || fid==0xFFFF))//iav测试台架发的spid与软件定义spid，高位低位相反，目前直接写死
            {
                lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, POSITIVE, 0);
            }
            break;
        case SERIAL_NUMBER:
            lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, POSITIVE, 1);
            break;
         default:
            if (id >= LIN_READ_USR_DEF_MIN && id <= LIN_READ_USR_DEF_MAX)
            {
                lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, POSITIVE, id);
                break;
                //��֪��ΪʲôҪ����
                // l_u8 data_callout[5] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
                // l_u8 i;
                // l_u8 retval = ld_read_by_id_callout(id, data_callout);
                // /*If the User ID is supported, make positive response*/
                // if (retval == LD_POSITIVE_RESPONSE)
                // {
                //     for (i =0; i <5; i++)
                //     {
                //         if (data_callout[i] != 0xFF)
                //         {
                //             lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, POSITIVE, id);
                //             break;
                //         }
                //         /* If all data_callout is 0xFF, then make negative response*/
                //         if (i == 4)
                //         {
                //             /* Make a negative slave response PDU */
                //             lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
                //         }

                //     }
                // }
                // else if (retval == LD_NEGATIVE_RESPONSE)
                // /*If the User ID is not supported, make negative response*/
                // {
                //     /* Make a negative slave response PDU */
                //     lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
                // }
                // else if (retval == LD_ID_NO_RESPONSE)
                // {
                //     /*Do not answer*/
                //     tl_slaveresp_cnt = 0;
                //     #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
                //     tl_service_status = LD_SERVICE_IDLE;
                //     #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
                // }

            }
            else
            {
                /* Make a negative slave response PDU */
                lin_tl_make_slaveres_pdu(SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
            }
            break;
    } /* End of switch */
}

void lin_condittional_change_nad()
{
    l_u8 id, byte, mask, invert;
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    id      = lin_tl_rx_queue.tl_pdu[lin_tl_rx_queue.queue_header][3];
    byte    = lin_tl_rx_queue.tl_pdu[lin_tl_rx_queue.queue_header][4];
    mask    = lin_tl_rx_queue.tl_pdu[lin_tl_rx_queue.queue_header][5];
    invert  = lin_tl_rx_queue.tl_pdu[lin_tl_rx_queue.queue_header][6];
#else /* Single frame support */
    id      = (*tl_current_rx_pdu_ptr)[3];
    byte    = (*tl_current_rx_pdu_ptr)[4];
    mask    = (*tl_current_rx_pdu_ptr)[5];
    invert  = (*tl_current_rx_pdu_ptr)[6];
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */

    /* Possible positive ID */
    if (id == 0)
    {
        if(byte>0 && byte<6)
        {
            /*Byte 1: Supplier ID LSB; Byte 2: Supplier ID MSB*/
            if(byte>0 && byte<3)
            {
                byte = product_id.supplier_id >> ((byte-1)*8);
            }
            /*Byte 3: Function ID LSB; Byte 4: Function ID MSB*/
            else if(byte>2 && byte<5)
            {
                byte = product_id.function_id >> ((byte-3)*8);
            }
            /* Byte 5: Variant */
            else
            {
                byte = product_id.variant;
            }
            /* Do a bitwise XOR with Invert and Do a bitwise AND with Mask */
            byte = (byte^invert)&mask;
            /* If the final result is zero, then give positive response*/
            if (byte == 0)
            {
                lin_tl_make_slaveres_pdu(SERVICE_CONDITIONAL_CHANGE_NAD, POSITIVE, 0);
                /* If the final result is zero then change the NAD to New NAD */
            #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
                lin_configured_NAD = lin_tl_rx_queue.tl_pdu[lin_tl_rx_queue.queue_header][7];
            #else/* Single frame support */
                lin_configured_NAD = (*tl_current_rx_pdu_ptr)[7];
            #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
            }
        }
    }
}

#endif /* End (LIN_PROTOCOL == PROTOCOL_21) */
#endif /* End ( _LIN_GPIO_ == 0 ) && !defined(_MC9S08SC4_H) */


#if LIN_PROTOCOL == PROTOCOL_21
/* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
void lin_diagsrv_functional_service(void)
{
    l_u16 length;
    l_u8 data[10];
    /* get pdu from rx queue */
    ld_receive_message(&length, data);

    /* do something here */
}
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
#endif /* End (LIN_PROTOCOL == PROTOCOL_21) */

#if LIN_PROTOCOL == PROTOCOL_J2602
void lin_diagservice_target_reset()
{
    l_u8 *signal_data_ptr;
    l_u8 nad;
    lin_tl_pdu_data *lin_tl_pdu;
    /* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    lin_tl_pdu = (lin_tl_pdu_data *)&lin_lld_response_buffer[1];
#else /* Single frame support */
    lin_tl_pdu = tl_current_rx_pdu_ptr;
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
    /* Set the reset flag within the J2602 Status Byte */
    /* Set error signal equal to error in response */
    lin_pFrameBuf[response_error_byte_offset] = (lin_pFrameBuf[response_error_byte_offset] &
                                                (~(0x07 << response_error_bit_offset))) |
                                                (0x01 << response_error_bit_offset);

    /* Create positive response */

    /* Get NAD of node */
    nad = (*lin_tl_pdu)[0];

    if (LD_BROADCAST != nad)
    {
        lin_tl_make_slaveres_pdu(SERVICE_TARGET_RESET, POSITIVE, 0);
    }
    else
    {
        tl_slaveresp_cnt = 0;
    }
}
#endif /* End (LIN_PROTOCOL == PROTOCOL_J2602) */

#endif /* End (LIN_MODE == _SLAVE_MODE_) */
/********------------ End of code for SINGLE Interface --------------**********/


/********------------- Code supports Multi interface ----------------**********/
#if LIN_MODE == _MASTER_MODE_
/*************************** FUNCTIONS *******************/


#if LIN_PROTOCOL == PROTOCOL_21

void lin_diagservice_assign_frame_id_range
(
    /* [IN] interface name */
    l_ifc_handle iii
)
{
    const lin_configuration* conf;
    l_s8 j, i = 0;
    l_u8 start_index;
    l_u8 cfg_frame_num = 0;
    lin_tl_pdu_data *lin_tl_pdu;
    /* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    l_u16 length;
    l_u8 NAD, data[10];
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
    /* Get current configuration */
    conf = &lin_ifc_configuration[iii];
    /* Do actions only for slave nodes */
    if (conf->function == _SLAVE_)
    {
        /* Multi frame support */
    #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
        /* receive message data */
        ld_receive_message(iii, &length, &NAD, data+2);

        lin_tl_pdu = (lin_tl_pdu_data *)data;
    #else /* Single frame support */
        /* Get current PDU pointer of RX queue */
        lin_tl_pdu = (lin_tl_pdu_data *)&conf->response_buffer[1];
    #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */

        /* Get start index in request */
        start_index = (*lin_tl_pdu)[3];

        /* Find the number of configurable frame */
        i = 1;
        while (0xFFFF != (conf->configuration_ROM)[i])
        {
            i++;
            cfg_frame_num++;
        }
        /* Check request validity */
        for (i = 7, j = start_index+4; j > start_index; i--, j-- )
        {
            if ((0xFF != (*lin_tl_pdu)[i]) && (j > cfg_frame_num))
            {
                lin_tl_make_slaveres_pdu(iii, SERVICE_ASSIGN_FRAME_ID_RANGE, NEGATIVE, GENERAL_REJECT);
                return;
            }
        }

        /* Store PIDs */
        for (i = 4, j = 1; i < 8; i++, j++)
        {
            switch ((*lin_tl_pdu)[i])
            {
                case 0x00:
                    /* Unassign frame */
                    (conf->configuration_RAM)[start_index + j] = 0xFF;
                    break;

                case 0xFF:
                    /* keep the previous assigned value of this frame */
                    break;

                default:
                    /* Calculate frame ID and Assign ID to frame */
                    (conf->configuration_RAM)[start_index + j] = lin_process_parity((*lin_tl_pdu)[i], CHECK_PARITY);
                    break;
            }
        } /* End of for statement */
        lin_tl_make_slaveres_pdu(iii, SERVICE_ASSIGN_FRAME_ID_RANGE, POSITIVE, 0);
    }
}


void lin_diagservice_read_by_identifier
(
    /* [IN] interface name */
    l_ifc_handle iii
)
{
    const lin_configuration* conf;
    const lin_node_attribute* node_conf;
    lin_product_id  ident;
    lin_tl_descriptor *tl_conf;
    lin_tl_pdu_data *lin_tl_pdu;
    l_u8 id;
    l_u16 supid, fid;
    /* Multi frame support */
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    lin_tl_pdu_data pdu_data;
    l_u16 length;
    l_u8 NAD, data[10];
#endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */

    /* Get current configuration */
    conf = &lin_ifc_configuration[iii];

    /* Get TL description */
    tl_conf = conf->tl_desc;

    /* Do actions only for slave nodes */
    if (conf->function == _SLAVE_)
    {
        /* Multi frame support */
    #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
        lin_tl_pdu = (lin_tl_pdu_data *)&pdu_data;
        /* receive message data */
        ld_receive_message(iii, &length, &NAD, data+2);

        lin_tl_pdu = (lin_tl_pdu_data *)data;
    #else /* Single frame support */
        lin_tl_pdu = (lin_tl_pdu_data *)&conf->response_buffer[1];
    #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */

        /* Get the node attribute */
        node_conf = conf->node_attribute;

        /* Get the product identification */
        ident = node_conf->product_id;

        /* Get supplier and function indentification in request */
        supid = (l_u16)(((*lin_tl_pdu)[5]) << 8);
        supid = supid |(l_u16)((*lin_tl_pdu)[4]);

        fid = (l_u16)(((*lin_tl_pdu)[7]) << 8);
        fid = fid |(l_u16)((*lin_tl_pdu)[6]);


        /* Check Supplier ID and Function ID */
        if (((supid != ident.supplier_id) && (supid != LD_ANY_SUPPLIER)) || \
                ((fid != ident.function_id) && (fid != LD_ANY_FUNCTION)))
        {
            tl_conf->tl_slaveresp_cnt = 0;
            return;
        }

        /* Get the identifier of request */
        id = (*lin_tl_pdu)[3];

        switch (id)
        {
            case LIN_PRODUCT_IDENT:
                lin_tl_make_slaveres_pdu(iii, SERVICE_READ_BY_IDENTIFY, POSITIVE, 0);
                break;
            case SERIAL_NUMBER:
            lin_tl_make_slaveres_pdu(iii, SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
            break;

            default:
                if (id >= LIN_READ_USR_DEF_MIN && id <= LIN_READ_USR_DEF_MAX)
                {
                    l_u8 data_callout[5] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
                    l_u8 i;
                    l_u8 retval = ld_read_by_id_callout(iii,id, data_callout);
                    /*If the User ID is supported, make positive response*/
                    if (retval == LD_POSITIVE_RESPONSE)
                    {
                        for (i =0; i <5; i++)
                        {
                            if (data_callout[i] != 0xFF)
                            {
                                lin_tl_make_slaveres_pdu(iii,SERVICE_READ_BY_IDENTIFY, POSITIVE, id);
                                break;
                            }
                            /* If all data_callout is 0xFF, then make negative response*/
                            if (i == 4)
                            {
                                /* Make a negative slave response PDU */
                                lin_tl_make_slaveres_pdu(iii,SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
                            }

                        }
                    }
                    else if (retval == LD_NEGATIVE_RESPONSE)
                    /*If the User ID is not supported, make negative response*/
                    {
                        /* Make a negative slave response PDU */
                        lin_tl_make_slaveres_pdu(iii,SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
                    }
                    else if (retval == LD_ID_NO_RESPONSE)
                    {
                        /*Do not answer*/
                        tl_conf->tl_slaveresp_cnt = 0;
                        #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
                        *conf->tl_service_status = LD_SERVICE_IDLE;
                        #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
                    }
                }
                else
                {
                    /* Make a negative slave response PDU */
                    lin_tl_make_slaveres_pdu(iii, SERVICE_READ_BY_IDENTIFY, NEGATIVE, SUBFUNCTION_NOT_SUPPORTED);
                }
                break;
        } /* end of switch */
    }
}
/*FUNCTION**********************************************************************
 *
 * Function Name : lin_condittional_change_nad
 * Description   :
 *
 *END**************************************************************************/
void lin_condittional_change_nad(l_ifc_handle iii)
{
    l_u8 id, byte, mask, invert;
    const lin_configuration* conf;
    lin_node_attribute* node_conf;
    lin_tl_descriptor *tl_conf;
#if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
    lin_transport_layer_queue *rx_queue;
#else /* Single frame support */
    lin_tl_pdu_data *lin_tl_pdu;
#endif
    /* Get current configuration */
    conf = &lin_ifc_configuration[iii];

    /* Do actions only for slave nodes */
    if (conf->function == _SLAVE_)
    {
        /* Get TL description */
        tl_conf = conf->tl_desc;
        /* Get the node attribute */
        node_conf = conf->node_attribute;

    #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
        /* Get receive queue */
        rx_queue = tl_conf->tl_rx_queue;
        id = rx_queue->tl_pdu[rx_queue->queue_header][3];
        byte = rx_queue->tl_pdu[rx_queue->queue_header][4];
        mask = rx_queue->tl_pdu[rx_queue->queue_header][5];
        invert = rx_queue->tl_pdu[rx_queue->queue_header][6];
    #else /* Single frame support */
        /* Get current PDU pointer of RX buffer */
        lin_tl_pdu = tl_conf->tl_current_rx_pdu_ptr;
        id         = (*lin_tl_pdu)[3];
        byte     = (*lin_tl_pdu)[4];
        mask      = (*lin_tl_pdu)[5];
        invert     = (*lin_tl_pdu)[6];
    #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */

        /* Possible positive ID */
        /* Support only identifier 0 for LIN Product Identification */
        if (id == 0)
        {
            if(byte>0 && byte<6)
            {
                /*Byte 1: Supplier ID LSB; Byte 2: Supplier ID MSB*/
                if(byte>0 && byte<3)
                {
                    byte = (node_conf->product_id).supplier_id >> ((byte-1)*8);
                }
                /*Byte 3: Function ID LSB; Byte 4: Function ID MSB*/
                else if(byte>2 && byte<5)
                {
                    byte = (node_conf->product_id).function_id >> ((byte-3)*8);
                }
                /* Byte 5: Variant */
                else
                {
                    byte = (node_conf->product_id).variant;
                }
                /* Do a bitwise XOR with Invert and Do a bitwise AND with Mask */
                byte = (byte^invert)&mask;
                /* If the final result is zero, then give positive response*/
                if (byte == 0)
                {
                    lin_tl_make_slaveres_pdu(iii,SERVICE_CONDITIONAL_CHANGE_NAD, POSITIVE, 0);
                    /* If the final result is zero then change the NAD to New NAD */
                    #if (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_)
                        node_conf->configured_NAD = rx_queue->tl_pdu[rx_queue->queue_header][7];
                    #else/* Single frame support */
                        node_conf->configured_NAD = (*lin_tl_pdu)[7];
                    #endif /* End (_TL_FRAME_SUPPORT_ == _TL_MULTI_FRAME_) */
                }
            }
        }
    }
}
#endif /* End (LIN_PROTOCOL == PROTOCOL_21) */

#if LIN_PROTOCOL == PROTOCOL_J2602
void lin_diagservice_target_reset
(
    /* [IN] interface name */
    l_ifc_handle iii
)
{
    const lin_configuration *conf;
    lin_tl_descriptor *tl_conf;
    lin_tl_pdu_data *pdu;
    l_u8 byte_offset_temp, bit_offset_temp;
    l_u8 nad;

    /* Get current configuration */
    conf = &lin_ifc_configuration[iii];

    /* Get TL configuration */
    tl_conf = conf->tl_desc;

    /* Get PDU from RX queue */

    /* Get current PDU pointer of RX queue */
    pdu = (lin_tl_pdu_data *)&conf->response_buffer[1];

    /* Set the reset flag within the J2602 Status Byte */
    byte_offset_temp = conf->node_attribute->response_error_byte_offset;
    bit_offset_temp = conf->node_attribute->response_error_bit_offset;

    /* Set error signal equal to error in response */
    lin_pFrameBuf[byte_offset_temp] = (lin_pFrameBuf[byte_offset_temp] &
                                        (~(0x07 << bit_offset_temp))) |
                                        (0x01 << bit_offset_temp);
    /* Create positive response */

    /* Get NAD of node */
    nad = (*pdu)[0];

    if (LD_BROADCAST != nad)
    {
        lin_tl_make_slaveres_pdu(iii, SERVICE_TARGET_RESET, POSITIVE, 0);
    }
    else
    {
        tl_conf->tl_slaveresp_cnt = 0;
    }
}
#endif /* End (LIN_PROTOCOL == PROTOCOL_J2602) */
#endif  /* End (LIN_MODE == _MASTER_MODE_) */
/* ---------------- End of code for Multi Interface ----------------- */
/**
 * @}
 */